Attaching Rip Fence - Craftsman 113.221611 Owner's Manual

2, Installthe SPREADER CLAMP.Placespreader
between spreaderclamp and bracket, Move
forwarduntilallthreeareinline,TIGHTEN WING
NUTS.
3 Lay a piece of straight flat wood againstthe
sawblade. I nsertfoldedpaperbetween spreader
andstrip of wood.
4,MAKESURETHE HEXNUTS UNDERNEATH
ARELOOSE
5 Lift the antikickbackpawlto clearthewoodand
holdthe spreader t ightlyagainst t hewood,Make
sure the wood is against the saw blade
TIGHTEN THEHEXNUTS,
This will alignthe spreaderin the middleof the
cut (KERF)madeby sawblade
THREE THICKNESSES
OFPAPER SPREADER
WING NUT CLAMP
PIECE OF
STRAIGHT WOOD
HOLD WOOD 1
"IGHTLY AGAINST
BLADE
ACK
HOLD SPREADER
TIGHTLY AGAINST WOOD
BRACKET
ATTACHING RIP FENCE
Apply a coat of paste wax to the top surface and
front ledge of the saw table This will allow the fence
to slide more easily
1 Loosen fence lock knob by turning counter-
clockwise,.
2. Attach fence head by placing head of fence over
front ledge in saw table.,
FENCE LOCK
KNOB
18