Aligning Table Extensions - Craftsman 113.221611 Owner's Manual

ALIGNING TABLE EXTENSIONS WITH
FRONT OF TABLE
!, Place blade of combination square on front of
table and table extension,,
2, Extension should line up with table,
'l'l='l'_'l'_'l'l'l'_'t'l'l'I'l'J'l,t'l'l'l'l't'l,l't,t
I' I
TO MOVE OUTER EDGE OF
EXTENSION BACK
1 Loosen screws C and F in right extension See
illustration
2, Tighten screws B and G until extension is lined
up,
3 Snug down screws C and F
4, Recheck level and flatness to table
5, Check left extension
6. Adjust left extension in same manner
F G
TO MOVE OUTER EDGE OF
EXTENSION FORWARD
1 Loosen screws B and G in right extension
2, Tighten screws C and F until extension is lined
up
3, Snug down screws B and G
4 Recheck level and flatness to table Check left
extension,
4_ Recheck level and flatness to table
5 Check left extension
6 Adjust left extension in same manner
lltI! l
, LH
|S