Table of Contents
Advertisement
Function directory
Function
LANGUAGE (center)
LENGTH (center)
LOCATION (left)
MEASURE (right)
MEAS. UNITS (center)
MEMO (right)
MTL VEL (BASIC)
O-DIAM (center)
PARITY (center)
PRINTER SELECT (center)
PULSER (PULS)
RANGE (BASIC)
RECALL (MEM)
RECTIF. (RCVR)
Krautkramer USN 52R/USN 52L
Description
Selection of the instrument dialog language
Determination of the byte length for data transfer via the RS232 interface
Selection of location in the active set
Selection of the correct measurement mode according to the type of probe used
Sets unit of measure for display and evaluation
Switching on of the MEMO function and entry of additional information
Adjustment of the sound velocity in the meterial
Adjustment of the outside diameter with curved surfaces
Parity check for data transfer via the RS232 interface
Selects printer driver
Change of operating mode
Sets range to be displayed
Loading of a data set selected with DATA SET
Selection of signal display mode
Issue 05, 02/00
Appendix
10-5
Advertisement
Chapters
Table of Contents
