Transferring The Display Contents; Printing Data Logger Report - Epson USN 52R Operating Manual

Interfaces, Peripherals
8.3 Transferring the display
contents
H Note:
The output is formated on an Epson matrix printer with
Intelligent Serial Interface as well as on a Seiko DPU.
You can print the active display contents by pressing A.
Connect the printer connection cable into the RS 232
socket of the instrument. If necessary readjust the
transfer parameters as described.
Operation:
– Set COPY MODE to HARDCOPY.
– If required, extend the A-Scan with L.
– If required, expand the gate range over the whole
display with H.
– When the contents of the display are presented as
you would like to have them printed then activate
printing with A.
The keypad remains disabled until the printing se-
quence has finished.
8-6

8.4 Printing Data Logger report

The Data Logger files are transferred to a serial printer
in an ASCII format. The 24 column report format is
compatible with all serial 24, 40 80 or 132 column print-
ers if the correct connection cable is used.
The measurement report is printed in the language
which you have selected in the LANGUAGE function
contained in the second operating level.
H Note:
In order to print a report of the active job whilst the A-
Scan is active, the Data Logger must be enabled and
LOC as well as VAL value displayed in the measure-
ment line.
In order to print reports of other files, you must firstly
select the number in the function FILE NUMBER in the
second operating level.
Issue 05, 02/00

Transferring the display contents

Krautkramer USN 52R/USN 52L