Storing Data - Epson USN 52R Operating Manual

Operation

Storing data

This group contains functions for storage and recall of
your data.
– With I go the function group MEM.
H Note:
To be able to find everything better, you can store a
name (max. 8 alphanumeric characters) with every data
set. If the MEMO function is activated, you have addi-
tional possibilities of data set description (free formula-
tion of texts or filling-in of predetermined header fields)
to improve the documentation. Please read the sections
5-14
Data set names and MEMO mode in chapter 5.10 on
this.
RECALL Loading of a stored setting
With this function you can load the instrument settings
(data set) which you have previously stored. If a data
set contains a stored setting, this will be indicated by
the symbol I in the RECALL function.
Attention:
The active settings will be overwritten, therefore store
beforehand in order to save them.
Operation:
– With M switch to ON so that the settings can be
loaded. When the sequence is finished, the display
automatically changes to OFF.
– Acknowledge system safety prompt with F.
Issue 05, 02/00
Adjustment of the USN 52R/USN 52L
Krautkramer USN 52R/USN 52L