Using The Bidirectional Adjustment Mode; Changing Default Settings - Epson TM-FX2180 Service Manual

Epson 9 pin impact dot printer service manual
Table of Contents

Advertisement

EPSON FX-2180 Service Manual

1.3.3 Using the Bidirectional Adjustment Mode

If the vertical lines in the printout are not properly aligned, you can use the
printer's bidirectional adjustment mode to correct this problem. See
Chapter 5 for instructions on performing the bidirectional adjustment.
1.3.4

Changing Default Settings

You can change the printer's default settings using the default-setting
mode. To enter the default-setting mode, hold down the Pitch button and
press the Operate button to turn on the printer. The printer prints the
language selection instructions. Select the language you want, and then
press the Font button to print the default-setting mode instructions. The
printed instructions list the settings you can change, describe how to
change them, and show you how the control panel lights help you make
settings.
Table 1-20 summarizes the default settings and options. Factory settings
are bold.
Table 1-20. Default Settings
Setting
Page length for front tractor*
Page length for rear tractor*
Skip over perforation
Auto tear-off
Auto line feed
Print direction
I/F (interface) mode
Auto I/F (interface) wait time
Software
0 slash
High speed draft
Input buffer
Buzzer
Auto CR (IBM 2381 Plus)**
IBM character table**
Character table
International character set for
Italic table
*
The options available vary depending on the country.
** These settings take effect only when IBM 2381 Plus emulation is
selected.
Chapter 1 Product Description
Options
Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8,
8.5, 11, 70/6, 12, 14, 17
Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8,
8.5, 11, 70/6, 12, 14, 17
Off, On
Off, On
Off, On
Bi-D, Uni-D
Auto, Parallel, Optional
10 seconds, 30 seconds
ESC/P, IBM 2381 Plus
Off, On
Off, On
Off, On
Off, On
Off, On
Table 2, Table1
Standard model: Italic, PC 437, PC
850, PC 860, PC 863, PC 865, PC
861, BRASCII, Abicomp, Roman 8,
ISO Latin 1
Italic U.S.A., Italic France, Italic
Germany, Italic U.K., Italic Denmark 1,
Italic Sweden, Italic Italy, Italic Spain 1
1-14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fx-2180

Table of Contents