Advertisement
WARNING:
Risk of Bursting
Air Tank', The following conditions
could lead to a weakening
of the tank, and result
in a violent tank explosion and could cause property damage or serious injury.
What Could Haopen
How To Prevent It
Failure to properly drain condensed
Drain tank daily or after each use. If
water from tank, causing rust and
tank develops a leak, replace it
thinning of the steel tank.
immediately with a new tank or replace
the entire compressor,
Modifications
or attempted
repairs
to
Never drill into, weld, or make any
the tank.
modifications
to the tank or its
Unauthorized
modifications
to the
attachments.
unloader
valve, safety valve, or any
other components
which control tank
pressure.
Excessive vibration can weaken the
The tank is designed to withstand
specific
air tank and cause rupture or
operating
pressures. Never make
explosion
adjustments
or parts substitutions
to
alter the factory set operating
pressures.
ATTACHMENTS
& ACCESSORIES:
Exceeding the pressure rating
of air
tools, spray guns, air operated
accessories, tires, and other inflatables
can cause them to explode or fly apart,
and could result in serious injury.
For essential control of air pressure, you
must install a pressure regulator and
pressure gauge to the air outlet (if not
equipped) of your compressor.
Follow the
equipment manufacturers
recommendation
and never exceed the
maximum
allowable pressure rating of
attachments.
Never use compressor
to
inflate small low pressure objects such
as children's toys, footballs,
basketballs,
etc.
-"f.,_'_f.,1 "1=
WARNING: Risk from Flying Objects
What Could Happen
How To Prevent It
The compressed
air stream can cause
soft tissue damage to exposed skin
and can propel dirt, chips, loose
particles, and small objects at high
speed, resulting in property damage or
personal injury.
Always
wear
ANSI
Z87.f
approved
safety
glasses
with side
shields
when
using
the
compressor,
Never point any nozzle or sprayer
toward any part of the body or at other
people or animals.
Always turn the compressor
off end
bleed pressure from the air hose and tank
before attempting
maintenance,
attaching
tOOlS
or accessories,
5-ENG
D30092
Advertisement
