Advertisement
Model No.
919,167802
Max. Developed
HP
7
Running HP
5.5
Sore
4.134"
Stroke
2.165"
Voltage-Single
Phase
240/60/1
Minimum
Branch Circuit Requirement
30 amps
Fuse Type
Time Delay
Air Tank Capacity
80
Approx. Cut-In
140
Approx. Cut-out
175
SCFM @ 100 psig
17.4
SCFM @ 175 psig
16.9
Refer to Glossary for abbreviations.
This manual contains information that is important for you to know and
understand. This information
relates to protecting YOUR SAFETY and
PREVENTING
EQUIPMENT
PROBLEMS. To help you recognize this
information, we use the symbols below. Please read the manual and pay
attention to these symbols.
I_'_J_
Indicates an
imminently hazardous
situation which, if not avoided, will
result in death or serious injury.
I_'_J_'_'_
Ind icat es a
potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
_'_1'_J_
Indicates a
potentially hazardous
situation which, if not avoided,
result in minor or moderate injury.
_T_'_Used
without the
safety alert symbol
indicates a potentially hazardous
situation which, if not avoided, may
result in property damaae.
Ih_l_o]-'tnq.+1+id _"Y.4_l_,_'d_[IP.[-:-]ljt,ttl_o,]njl[o
_]P.[-.+
_Some
dust created by power sanding, sawing, grinding,
drilling, and other construction
activities contains chemicals
known (to the State of California) to cause cancer, birth defects or other
reproductive
harm. Some example of these chemicals are:
•
lead from lead-based
paints
•
crystalline silica from bricks and cement and other masonry products
•
arsenic and chromium from chemically-treated
lumber
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment,
always wear
MSHA/NIOSR
approved, properly fitting face mask or respirator when using
such tools.
When using air tools, basic safety precautions
should always be followed to
reduce the risk of of personal injury.
3-ENG
[330092
Advertisement
