Advertisement
Contents
of Carton
1 - Air Compressor
1 - Parts bag containing:
1 - Operator's Manual
1 - Parts Manual
4 - 5/8" Washers
Tools Required
for Assembly
1 - g/16" socket or open end wrench
1 - electric drill
iI=l,t '
Multi-Viscosity
motor oils, like
10W 80, should not be used in an air
compressor. They leave carbon
deposits on critical components,
thus reducing
performance
and
compressor
life. Use air compressor
oil only..
1,
Remove the oil drain plug (B) and
washer (C).
Unpacking
1.
Remove all packaging,
It may be
necessary to brace
or support one side of the outfit
when removing
the pallet because
the air compressor will have a
tendency to tip.
2.
Remove and discard the (4)
screws and washers holding the
compressor to the pallet.
3.
With the help of another person
carefully remove air compressor
from pallet and place on a level
surface,
To Add Oil To Pump
_
Compressore
are
shipped without oil.
A small amount of oil may be
present in the pump upon receipt
of the air compressor. This is due
to plant testing
and does not mean
the pump contains oil. Do not
attempt to operate this air
compressor without first adding oil
to the crankcase. Serious damage
can result from even limited
operation unless filled with oil and
broken in correctly. Make sure to
closely follow initial start*up
procedures.
2,
Obtain the drain plug extension
([3), from the parts bag,
3,
Apply thread sealant tape to the
threads of the drain plug extension
4,
Assemble the washer (C), drain
plug extension (D), and drain plug
(B) as shown in Figure.
5,
Tighten securely.
6,
Remove the oil fill plug (A),
7,
Fill the crankcase with the
recommended
oil. NOTE: Use an
air compressor oil such as SAE-30
(API CG/CD heavy duty motor oil).
Under extreme winter conditions
use SAE-20 weight oil.
8,
Replace the oil fill plug (A) and
tighten securely.
--)_2
1,q-ENG
Advertisement
