Advertisement
ASSEMBLY
HOW TO PREPARE THE ENGINE
Fill With OII
This Edger was shippedwith a 20 ounce
containerof SAE30 motoroil.Addthis oilto
the engine beforeoperating.Tofill the crank-
case, removethe oilfill cap/dipstick and add
the SAE30 motoroil. DO NOT OVERFILL,
NOTE: The engine may contain a small
amount of oil When adding o11, f requently
Insert the oil fill celddlpetiek end check
the amount of oll In the engine. DO NOT
OVERFILl,
OII Recommendations
Only use high quality detergent oil rated with
API service classification SG. Select the oil's
SAE viscosity grade according to your ex-
pected operating temperature. Although mul-
ti-viscasity oils (5W30, 10W30, etc.) improve
starting in cold weather, these multi-viscosity
otis will result in increased oil coflsumption
when used above 32 degrees. Check the
engine oil level more frequently to avoid pos-
sible engine damage from running the en-
gine low on oil,
<-
<-
32+ I
Colder_._
,-_
--Warmer
'l
How To Add The Engine OII
1. Put the Edger on a levelsurface.
2. Removethe oilfillcap (Figure5).
3. Slowlyfillthe enginecrankcase.DO NOT
OVERFILL.
How To Fill With Gasoline
Make sure thatthe gasolinecontaineris
cleanandfree fromdust or other foreignma-
terial.Never use gasolinethat couldbe stale
fromlongperiodsof storage.
1. Removethe fuelcap.
2. FIll the fuel tank with clean, fresh, un-
leaded grade automotive gasoline.
A
ARNING: Always use e safety
fuel container. Do not smoke
when adding the fuel mixture to
the engine. When Inside an enclosure,
do not fill the fuel tank. Before you add
the fuel mixture, stop the engine. Let the
engine cool for several mlnutce.
NOTE: ENGINES WHICH ARE CERTIFIED
TO COMPLY WITH CAUFORNIA
AND US
EPA EMISSION REGULATIONS
FOR
ULGE ENGINES, ere certified to operate
on regular unleaded gasoline. Include the
following emieslon control system(s):
EM, TWC (if so equipped).
Include any
user adjustable features - therefore no
other adjustments
are needed.
Oil Fill
Cap
/
Fuel
Cap
Fuel Tank
Figure 5
F-001106M
8
Advertisement
