Advertisement
MAINTENANCE
SPARK PLUG
Check the spark plug every 25 hoops. R e-
place the spark plug if the electrodesare
pitted, bumed,or if the pomelainis cracked.
Make sure the spark plug is clean.
Clean the spark plug by carefully scrap-
ing the electrodes (do not sand blast or
usa a wire brush).
I
moval._ghten the sparkplugto a torque
of 15 foot-pounds.
Feeler
0.030"
Gauge
I
2. Check the spark plug gap witha feeler
gauge.
3.
Before installing the spark plug, coat
the threads lightly with oil for easy re-
CARBURETOR
ADJUSTMENT
Nevermake unnecessaryadjustments to the
carburetor.The carburetorwas set at the
factoryto operateefficientlyundermost ap-
plications.However,if adjustmentsare re-
quired,we recommendyoucontactyour
nearestSears ServiceCenter.
A
WARNING: The engine gover-
nor Is set at the factory. Do not
change the governor setting,
Over speeding the engine above the fac-
tory setting can be dangerous. If you
think the engine governor needs an sd-
|ustment, contact your nearest Sears
Service Center.
F-001106M
18
Advertisement
