Advertisement
OPERATION
HOW TO USE THE CURB-HOPPING
FEATURE
Because the front wheel and the dght rear
wheal until the front wheel is level with
wheel are adjustable, the Edger can be used
the left rear wheel and the unit Is setting
cn uneven surfasas, such as the curb shown
on the curb as shown in Figure 12.
in Figure 12. Set the wheel positions as fol-
lows.
7.
Loosen the rear wheal knob.
1. Stopthe engine.
2. Disconnect t he sparkplugwire fromthe
sparkplug.
8.
Lower the right rear wheel unUlthe
Edger is level and the left rear wheel is
on the curb.
3. Loosenthe front wheal knob.
4, Slide the front wheel fo the bast posi-
tionto clearthe curband balancethe
unit,
9. Securelytightenthe rear wheel knob,
10. Connectthe sparkplugwire to the spark
plug.
5.
Securely tighten the front wheel knob.
6.
Use the curb height adjust lever to
lower the front wheal. Lower the front
A
ARNING:
Keep away from the
rotating blade. The blade can
cause Injury.
Support Rod
Rear Wheel Knob
Blade Guard
Front
WheelKnob
Front Wheel
F-001106M
13
Figure12
Advertisement
