Table of Contents
Advertisement
CAST INDICATOR M MKI
COARSE
LEVER
E rGL,_P LEVER
Fixed Base with Motor
Hou_
This router is designed for speed, accuracy
and convenience in performing cabinet work,
routing, fluting, beading, cove-cutting, dove
tails, etc. It will enable you to accomplish Inlay
work, decorative edges and many types of
special carving.
DEPTH ADJUSTMENI"
WITH FIXED B/_E
Your router is equipped with a true micrometer
type fine adjustment meshanlsm, which can be
used in any position and provides precise
adjustment
of the router bit position
for
unmatched accuracy. When the tool is lowered
to the approximate position desired, this device
may be adjusted to preclse!y set the final bit
position.
Your router also features three horizontal
notches on both sides of the motor housing for
coarse adjustments. The notches are spaced
1/2" apart which allows you to quickly lower or
raise the tool depth in three 1/2" Increments,
approximately 12.7 mm, by simply depressing
the coarse adjustment release lever.
TO ADJUST DEPTH
NOTE: All depth adjustments must be made
with the base clamp lever released.
1. Hold the tool In a horizontal posttlonwith the
base clamp lever facing you.
2. Open the base clamp laver to release the
motor.
8. COAIP_E ADJ_
rMENT:
To make a larg_
jpth adjustment, depress
coarse adjustma
'elease lever and raise or
lower to desired i
b_The 3 horizontal notches
in the motor ho!_
oare spaced 1/2" apart to
make this adJuel t
_ eselar.
4. FINE DEPTH I
It/6TMENT:
To use the fine _
_ment feature, turn the fine
adjustment kno_ _ Gkwlseto lower the router
bit or counter-ckKt_ _
to raise It.
NOTE: Be sure €
adjustment
lever is
engaged
in on
coarse adjustment
notches before =
! a fine adjustment.
To allow
the indicator ring is
graduated In
(Note: one full t
fine adjustment knob =
1/16" or a
1.5 mm. The fine
I has a total adjustment
range of 7/8"
Each cast Indicator mark
next to coarse _
equal to 1/8"
To
tool, avoid wedging the
Iower_
housing as shown in
Figure 11.
5. After making depth adjustments, re-clamp
the motor.
The indicator ring may be reset to zero without
moving the fine _atment
knob, to allow the
user to begin tho adjustment
from any
reference point d_.
-12-
Hide quick links:
Advertisement
Table of Contents
