Download Print this page

Operating Instructions; Maintenance And Repair Instructions; Cleaning And Storage; Troubleshooting Chart - Craftsman 316.859510 Operator's Manual

Electric sharpener
Hide thumbs Also See for 316.859510:

Advertisement

Available languages

Available languages

OPERATING INSTRUCTIONS

NOTE:
This accessory is to be used on electric start capable units only.
Refer to the Starting Instructions section of the unit's Operator's
Manual for proper starting instructions when using this accessory.
FOR INTERMITTENT USE ONLY.
OPERATING THE ELECTRIC STARTER
WARNING:
To avoid serious personal injury and unit damage do
not use the electric starter in damp or wet locations, in rain or snow.
NOTE:
Inspect unit prior to using this unit. DO NOT use if any part of this
unit is damaged in any way. Take to an authorized service dealer
for replacement or repairs.
WARNING:
A damaged unit may cause serious personal injury
due to electrical shock. DO NOT use until the unit is repaired or
replaced by an authorized service dealer.
1.
Place the electric starter keyed tip into
the hole in the rear of the engine,
making sure the engine tabs on the
back of the engine are flush with the
indents on the electric starter. (Fig. 1)
NOTE:
It may be necessary to slightly
twist the electric starter until the
key fits securely into the engine.
2.
With the electric starter flush with the
engine press the ON (I) button for no
more than 5 seconds or unit starts.
(Fig. 2)
NOTE:
The electric start is designed to be
used intermittently. Press and hold
the On/Off switch for no longer
than 5 seconds at a time with a 90
second cooling period in between
each starting attempt.
3.
Once the engine has started, remove
the electric starter from the engine, the
unit is ready for use.
IF...
Electric starter does not turn on or
suddenly stops while in use check
the reset button on the unit and
press if needed. (Fig. 3)
NEED MORE HELP?
You'll find the answer and more on managemyhome.com – for free!
Find this and all your other product manuals online.
I
Get answers from our team of home experts.
I
Get a personalized maintenance plan for your home.
I
Find information and tools to help with home projects.
I
Engine Tabs
Indents
Fig. 1
ON (I)/ OFF (O) Switch
ON (I)
OFF (O)
Fig. 2
Reset Button
Fig. 3
brought to you by Sears

MAINTENANCE AND REPAIR INSTRUCTIONS

NOTE:
This unit was designed to not have any serviceable parts and
should ONLY be repaired by an authorized service dealer.
CLEANING
Use a small brush to clean off the outside of the unit and keyed tip. Do not
use strong detergents. Household cleaners that contain aromatic oils such
as pine and lemon, and solvents such as kerosene, can damage plastic
housing or handle. Wipe off any moisture with a soft cloth.
STORAGE
• Check unit before storage to be sure the equipment is in safe working
condition.
• Stop the motor.
• Store the unit indoors, in a dry and locked place, out of the reach of children.
• Maintain or replace safety and instruction labels, as necessary.
TROUBLESHOOTING
ELECTRIC STARTER WILL NOT TURN ON
CAUSE
The electric starter may not be
plugged in
The reset button may be tripped
GFI circuit tripped
4
ACTION
Check that the plug is plugged in
Unplug the electric starter from the
wall or extension cord and press
the reset button on the unit.
Reset GFI circuit

Advertisement

loading