Product View And Features; Specifications; Assembly Tools Required; Applications - Craftsman Speed start 316.715860 Operator's Manual

APPLiCATiONS
Asabrushcutter:
• Cutting w eeds a ndlight b rush upto1/2inchindiameter
Other o ptional accessories may beused withthisunit.
Spark Plug
Choke Lever
ASSEMBLY TOOLS REQUIRED:
• Medium flat-head screwdriver or T-20
Torx® screwdriver
Large flat-head screwdriver or T-25 Torx
screwdriver
Throttle Lock-Out
On/Off Switch
Support Fitting
Handle
Starter
Rope Grip
Filter
Cover
Shaft Housing
Convertible
TM
Coupler Shaft Grip
Throttle
Control
Fuel Cap
Primer Bulb
Barrier Bar \
Blade Shield
Engine Type ........................................................................................ Air-Cooled, 2-Cycle
Displacement ....................................................................................... 27 cc (1.64 cu. in.)
Idle Speed RPM ...................................................................................... 2,800 - 3,400 rpm
Operating RPM ........................................................................................... 6,800+ rpm
Spark Plug Gap .................................................................................... 0.025 in. (0.635 mm)
Spark Plug .......................................................................... Champion® RDJ7J or equivalent plug
Lubrication ........................................................................................... Fuel/Oil Mixture
Fuel/Oil Ratio .................................................................................................. 40:1
Fuel Tank Capacity ...................................................................................... 14 oz. (414 ml)
Approximate Unit Weight (No fuel, with blade, blade shield and handle) ...................................... 11 - 13 Ibs. (5 - 5.9 kg)
Cutting Mechanism ................................................................................ 4-Tooth Cutting Blade
Shoulder Strap ...................................................................................... Single Quick-Snap
Cutting Path Diameter ................................................................................... 8 in. (20.32 cm)
* All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes at any
time without notice.