Advertisement
_tb
WARNING:
When servicing use only identical
Craftsman
replacement parts. Use of any other
parts may create a hazard or cause product damage.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, carbon dust, etc.
_l_
WARNING:
Do not at any time let brake fluids,
gasoline, petroleum-based
products, penetrating oils,
etc. come in contact with plastic parts. They contain
chemicals that can damage, weaken, or destroy
plastic.
Do net abuse power tools. Abusive practices can
damage tool as well as workpiece.
Only the parts shown on parts list, page 17, are intended
to be repaired or replaced by the customer. All other parts
should be replaced at a Sears Service Center.
,_
WARNING:
Do not attempt to modify this tool or
create accessories not recommended
for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
The battery pack for your drill-driver is equipped with
•
Store and charge your batteries in a cool area.
nickel-cadmium
rechargeable batteries. Length of service
Temperatures
above normal room temperature will
from each charging will depend on the type of work you
shorten battery life.
are doing.
•
BATTERIES
The batteries in this tool have been designed to provide
maximum trouble free life. However, like all batteries, they
will eventually wear out. Do net disassemble
battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry,
could result in a serious burn.
To obtain the longest possible battery life, we suggest the
Never store batteries in a discharged condition.
Recharge them immediately after they are
discharged.
All batteries gradually lose their charge. The higher
the temperature the quicker they lose their charge. If
you store your tool for long periods of time without
using it, recharge the batteries every month or two.
This practice will prolong battery life.
following:
To preserve natural resources, please
recycle or dispose of batteries properly.
This product contains nickel-cadmium
batteries. Local, state or federal laws
may prohibit disposal of nickel-cadmium
batteries in ordinary trash.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
BATTERY
PACK
REMOVAL
AND PREPARATION
FOR RECYCLING
A
WARNING:
Upon removal, cover the battery pack's
terminals with heavy duty adhesive tape. Do not
attempt to destroy or disassemble battery pack or
remove any of its components.
Nickel-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
The following
recommended
accessories
are currently
available
at Sears Retail Stores.
Purchase
these accessories
if your drill is Model No. 315.269221
•
6-Pc. Extra Length Magnite Power Bit Set
•
17-Pc. Power Screwdriver/Nutdriver
Set and Case
•
30-Pc. Power Screwdriver/Nutdriver
Set and Case
•
High Speed Bits (For Wood or Metal)......3/4
in. Max.
Purchase
these accessories
if your drill is Model
No. 315.269261
or 315.269271
•
6-Pc. Extra Length Magnite Power Bit Set
•
High Speed Bits......1/2 in. Max.
•
30-Pc. Power Screwdriver/Nutdriver
Set and Case
•
Wood Boring Bits......1-1/2 in. Max.
•
17-Pc. Power Screwdriver/Nutdriver
Set and Case
,_
WARNING:
The
of attachments
accessories
not listed
be hazardous.
might
use
or
17
Advertisement
