Procedures Of Replacement - Chery SQR480ED User Manual

Table of Contents

Advertisement

ignition key.
- Turn on your emergency flashers,
firmly set the parking brake, if
necessary, put into gear 1 or reverse
gear.
- Put a cuneiform spacer or something
can be used as obstacle to hold the
wheel, on the rear or front direction
of the wheel diagonally opposite the
flat tire.
- Set a warning triangular signpost, 10
M away from the vehicle.
- Have everyone get out of the vehicle
on the side away from traffic, to a
safe place.

Procedures of replacement

Loosen
-
Pry off rim cap.
-
Loosen every wheel bolt for one
circle with wheel spanner, but do
not remove the bolts yet, just
unscrew them about one-half turn,
before raising the wheels.
-
Position the jack at the correct
jack point as shown. Put jack
vertically close to front or back
- 143 -
In Case of an Emergency
direction of the flat tire. Rotate
jackscrew clockwise by hand,
until jack top touches the vehicle
bottom.
Tighten
Insert the jack handle into the jack and
turn it clockwise, so as to raise vehicle,
until top of jack embedded in concave
groove firmly and the wheels depart
from the ground (about 3 CM).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sqr480ecTritec1.6lSqr477fSqr7162lSqr7162tl

Table of Contents