High Beam Indicator Light; Front Fog Light/Rear Fog Light Switch - Chery SQR480ED User Manual

Table of Contents

Advertisement

After the turn signal warning light or
danger warning light switch has been
turned on, if the indicator flickers, it
indicates turn signal light or danger
warning light works. If the flicker
frequency is quite short, it indicates
that there is a problem somewhere in
the electric bulb of turn signal light.
!Notice
If the bulb is damaged, replace it as
soon as possible in order to avoid
accident. Please check the fuse and
bulb to see whether or not they are
burned out, if you send out turn signal,
but the green arrow is not on.

High beam indicator light

For high beams, turn the headlamp on,
the high beam indicator will come on
then.

Front fog light/rear fog light switch

Position 1: turn on front fog light.
- 67 -
Instruments and Controls
Position 2: turn on both front fog light
and rear fog light, or only turn on the
rear fog light.
When the switch is in position 2, the
indicator light will be on.
After the ignition is turned on, front
fog light can work only if the parking
light is on. It can work simultaneously
with the high-low beam headlights.
The
rear
fog
lamp
simultaneously only with the front fog
lamp.
You are allowed to use the rear fog
lamp, only if they are needed when the
visibility is very poor, for the rear fog
light is very dazzling. (Visibility is
within 50m)
can
work

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sqr480ecTritec1.6lSqr477fSqr7162lSqr7162tl

Table of Contents