Chery SQR480ED User Manual page 10

Table of Contents

Advertisement

Brief Indroduction
to drive when the coolant temperature
goes up to normal state, otherwise the
engine will be worn at an earlier stage.
The acceptable top engine speed in a
short time is 4000 r/min. In manual
shifting case, you should upshift when
the
indicating
pointer
tachometer gets into the red zone. And
avoid the high-speed running of the
engine. It is advantageous for economy
of fuel, decrease of engine noise and
environmental pollution if you upshift
without delay.
It is not necessary for engine speed
being too low, while normally driving.
It is easy for the engine to accumulate
Carbon if the engine speed is too low
frequently, and furthermore it will
influence the normal use of engine.
It is necessary to drive at low speed,
during the first 100 km. You should
take special care, for the tires of new
car do not have the best friction force
for roadway, which will result in brake
of
the
force not enough and brake distance
enlarged.
! Notice: Drive the vehicle safely
during the first 100 km after replacing
the tires.
Brake friction disc of new car does not
have the best frictional force; therefore
it also needs break-in period. You
should drive cautiously during the first
200 km; heavily apply the brake pedal
with the parking brake depressed.
- 4 -
Drive the vehicle safely!
!Notice: Pay attention to the break-in
period during the first 200 km, after
replacing brake friction disc, and drive
the vehicle safely.
The wheel nuts should be retightened
after the new car driving 800 km.
!Notice: The wheel nuts should be
retightened after driving 800 km, if the
tires have been replaced or the wheel
nuts have been loosened before.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sqr480ecTritec1.6lSqr477fSqr7162lSqr7162tl

Table of Contents