External Maintenance And Cleaning Of Automobile; Anticorrosion; Latten Spoilage - Chery QQ3 User Manual

External maintenance and
cleaning of automobile
External lacquered surface
Lacquering brings esthetic app earance
and viability to automobile.
The best way of lacquered surface
maintenance is to clean frequently to
keep lacquered p arts neat, use tepid water
or cold water for washing rather than hot
water or under the direct irradiation of
sunshine, soap or chemical cleaners with
high concentration are not permitted to
use, all the cleaning agents have to be
instantly flushed away from the surface,
none of which could remain on surface.
The Chery automobile, designated for
normal environment conditions,
endure the influence of normal natural
environment, whereas in
conditions like high-pressure car flushing
circumstance the water will go into the
inner part of car.
Burnishing and waxing of car body
Regular burnishing and waxing of car
body are suggested to remove sediments
These sediments may not be flushed
away completely by quick washing,
127
on the surface. Chery Service Station
provides relevant qualified products.
Regular water cleaning should be kept to
protect the glossiness of external metal
components. Special care should be taken
to protect plumbiferous luster.
In order to avoid plumbiferous luster
spoilage, inscriptive grinding materials,
water vapour or corrosive soap are not
permitted for cleaning, all the bright
metal components are suggested to daub
paraffin. Leaden wheels and wheel disks
have to be washed to keep tidy and avoid
contact with road dust or saliferous
objects, the original status of wheels and
wheel disks should be protected and
regular cleaning is suggested, corrosive
cleaning agents or brushes are not
can
permitted to use to avoid surface coating
spoilage
abnormal

Anticorrosion

Your automobile is designated according
to the requirement of anticorrosion; most
components of vehicles have applied
therefore cleaning agents are required.
Damages to lacquering surfaces must be
Automobile maintenance
special substances and protective coating
to keep nice appearance, strength and
reliable operation. Some parts (such as
the special components located in the
engine room and chassis) are unexposed
to the air, thus the rusty stain will not
influence their reliabilities, and measures
of anticorrosion are unnecessary to take
on t hese parts.

Latten spoilage

If your vehicle is damaged, repair and
replacing of body panels need to be done,
suitable anticorrosive materials should be
guaranteed on the repaired or replaced
parts of fixed automobile body to resume
anticorrosion.
Impurity sediment
If impurities such as Calcium chloride
and other salts, ice flux, pavement tar,
resin, ordure of birds, chemicals from
industry and others remain on the
lacquering surface, the surface coating
would be damaged.
avoided when using chemical cleaning
agents.