Chery QQ3 User Manual page 153

Service and Maintenance
Engine oil checking procedures
Ensure engine oil at specified level and
right lubrication. Inspect oil level because
oil will consume when engine runs.
Vehicle must be stopp ed at level surface
when checking. Wait several minut es
when checking oil level ensuring oil
return oil pan. If engine is cold, it will
take a long time for oil returning.
Checking Oil Level: remove oil dipstick
and clean with discottony cloth, then
insert dipstick to full. Remove dipstick
and inspect if oil is between M IN and
MAX scale.
Check if dipstick is dirty.
If oil level is under M IN scale, add oil to
ensure oil level reaches M AX scale. Oil
should not surpass MAX scale, otherwise
oil consumption will increase which will
foul spark park and cause carbon deposit.
When add oil, use same brand and grade
oil with previous.
！Notice
Avoid frequent touch with engine oil;
otherwise skin illness will be caused.
Clean thoroughly after touching oil. Used
oil should be kept away from children.
Inadequate and over oil will cause engine
damage. Inspect engine oil timely and
frequently. Add oil as necessary. DO
NOT over add engine oil.
Service and Maintenance
SPECIAL CAUTION:
For engine damage caused by inadequate
oil, manufacturer does
warranty.
Replacing engine oil and oil filter
Replace engine oil up on t ime and m ileage
interval because oil may also deteriorate
with time besides engine running.
Under special conditions as frequent cold
starting and on-off
municipal road surface, engine oil and oil
filter replacing interval shall shorten
accordingly (comparing
recommended service schedu le)
Replace oil filter when replace oil.
not effect
switching in
with
144