Table of Contents
Advertisement
Place lower back panel between side panels at rear of bottom shelf. Make sure the slots are positioned as shown (A). Secure
lower back panel to side panels using two 1/4-20x1/2" screws, 7ram lock washers, and 7ram flat washers on each side.
7turnflat washer 7turnlock washer
1/4-20x1/2"screw
Lowerbackpanel
,,."
Theverticalflange shouldbe on left side
whenthe lower back panelis properly
installed
This step requires two people
to lift and position grill head
onto cart. Carefully lower the grill
head onto the cart, aligning slots at
bottom of grill head with posts on
cart side panels. Make sure the
regulator hose is hanging outside
the cart. Grill head must face open
side of cart.
Grill head
Regulatorhose
15
Advertisement
Table of Contents
