Assembly Instructions - BLADEZ SXPRO Owner's Manual

ASSEMBLY INSTRUCTIONS
STEP 1
A) Secure the front stabilizers (2) to the
main frame (1) and attach it with carriage
bolts (8), washers (9), and dome nuts (10).
B) Secure the rear stabilizer (3) to the main
frame (1) and attach it with carriage bolts
(8), washers (9), and dome nuts (10).
i
STEP 2
Slide the handlebar post (4) into the main
frame (1) and tighten the knob (48C) to
secure. Loosen the two bolts (31) on the
frame. Position the water bottle holder (77)
then tighten the bolts.
STEP 3
Attach the handlebar (7) to the handlebar
post (4) and secure (tighten) it with the L
shaped knob (74) and washer (75).
77