Troubleshooting Checklist - Xerox Phaser 3117 User Manual

If the printer is not working properly, consult the following checklist. If the printer
does not pass a step, follow the corresponding troubleshooting suggestions.
Check
Check the power cord
and the power switch.
Make sure that the
LED is on.
Press and hold the
button to print a
demo page.
Check the demo page to
see if it is printed
correctly.
Print a short document
from a software
application to verify that
the computer and printer
are connected and are
communicating correctly.
If completing the
checklist does not
resolve the printer
problem, check the
following troubleshooting
sections.
5.2
S P
OLVING ROBLEMS

Troubleshooting Checklist

Check the power source by plugging into another
outlet.
In the Ready mode, the
LED lights red or blinks, go to "Troubleshooting
Error Messages" on page 5.17.
• If a demo page does not print, check the paper supply
in the input tray.
• If the paper jams in the printer, go to "Clearing Paper
Jams" on page 5.6.
If there is a print quality problem, go to "Solving Print
Quality Problems" on page 5.11.
• If the page does not print, check the cable connection
between the printer and the computer.
• Check the print queue or print spooler to see if the
printer has been paused.
• Check the software application to ensure you are
using the proper printer driver and communication
port. If the page is interrupted during printing, go to
"Solving General Printing Problems" on page 5.3.
• "Solving General Printing Problems" on page 5.3.
• "Troubleshooting Error Messages" on page 5.17.
• "Common Windows Problems" on page 5.18
• "Common Linux Problems" on page 5.19
Solution
LED lights green. If the