Cancel() Button - Xerox Phaser 3117 User Manual

LED
Cancel(
Function
Printing demo page
Manual feeding
Canceling print job
Toner Save mode
on/off
If you press the
and the Toner Save mode is enabled.
If you press this button once again, this LED is off and the
Toner Save mode is disabled.
If the and
problems.
To solve the problem, see "Troubleshooting Error Messages"
on page 5.17
) button
In Ready mode, press and hold this button for about 2
seconds until all LEDs blink slowly, and release.
Press this button each time you load a sheet of paper in the
tray, when you select Manual Feed for Source from your
software application.
For detailed information, see "Using Manual Feed Mode" on
page 3.7.
Press this button during printing. The
while the print job is cleared from both the printer and the
computer, and then return to Ready mode. This may take
some time depending on the size of the print job.
In Manual Feed mode, you can't cancel the print job by
pressing this button.
For detailed information, see "Using Manual Feed Mode" on
page 3.7.
In Ready mode, press this button to turn the Toner Save
mode on or off.
For detailed information, see Software User Guide and
page 4.5.
Description
button in Ready mode, this LED is on
LEDs blink, your system has some
Description
LED blinks
I 1.7
NTRODUCTION
1