Getting Started - Intergraph InterSite Quick Start Manual

3. If the EMC cannot deliver the alert out-of-band to the defined monitoring console, it
attempts to send the alert to a pager. The pager is used only for critical shutdown
conditions, which are the Over-temp condition (temperature exceeded acceptable
threshold) and Under-temp condition (temperature fell below acceptable threshold).
4. If the pager service is not configured, the alert is not delivered.
You can configure ISM to deliver out-of-band alerts depending on the day and time. For
example, you can configure ISM to only send out-of-band alerts to a pager after regular work
hours. See the online Help or the Intel LANDesk Server Manager v3.0 Administrator's
Guide (
LDSM
printed documents for more information.
NOTE If you use the Out-of-Band remote control feature, you must have an external modem
attached to the server, and the LANDesk Modem Arbitrator must be running. See the online
Help or the Intel LANDesk Server Manager v3.0 Administrator's Guide for information.

Getting Started

Go to Chapter 2, "Preparing for Installation," to prepare to install the ISM software. Then
go to Chapter 3, "Installing, Configuring, and Removing InterSite Server Monitor (ISM)," to
install the ISM software. To learn how to run and start to use Server Manager Console, go
to Chapter 4, "Using Server Manager Console."
This Quick-Start Guide provides the basic information you need to set up the EMC for use,
and to install and start using the ISM software. For more information about the ISM
product, refer to the following files on the Intergraph SRVMON30 Supplemental diskette:
u
README
Server Manager product.
u
.
FIXES TXT
product since the last release.
Additional Intel LANDesk Server Manager information is available as follows:
u
Intel LANDesk Server Manager v3.0 Installation Guide (
guide covers installation and configuration of LANDesk Server Manager 3.0. The file is
available in the
A printed copy of the document should be included with the Intel CD-ROM.
u
Intel LANDesk Server Manager v3.0 Administrator's Guide (
guide covers administrative tasks and configuration of LANDesk Server Manager 3.0.
The file is available in the
CD-ROM. A printed copy of the document should be included with the Intel CD-ROM.
_ . ) on the Intel LANDesk Server Manager CD-ROM or the Intel
30
ADMIN PDF
. . This file provides Intergraph-specific information for the LANDesk
TXT
. This file lists the Intergraph fixes made to the InterSite Server Monitor
directory on the Intel LANDesk Server Manager CD-ROM.
ELECDOCS
ELECDOCS
30
LDSM
LDSM
directory on the Intel LANDesk Server Manager
3
_ . ). This
INSTALL PDF
_ . ). This
30
ADMIN PDF