Getting Started - Intergraph InterServe 75 Start Here Manual

1

Getting Started

Your InterServe 75 shipped with the Microsoft Windows NT Server 4.0 operating system
partially installed. To set up your InterServe 75 for use, you will need to set up the system
hardware, and then set up the operating system and associated system software.
To set up your InterServe 75:
1. Set up the system hardware according to the instructions in the System Guide delivered
with the system.
NOTE The InterServe 75 system hardware is the same as the TD-260 system hardware described in
the System Guide .
2. Set up the operating system and associated system software according to the instructions
in this document.
3. Configure the system for use according to the instructions in the System Guide.
See the System Guide for information on operating and expanding the system.
NOTE If you need to reinstall the operating system and associated system software, follow the
instructions in this document instead of the instructions in the System Guide .
1