Emergency Mgmt. Card Connection; Dmi - Intergraph InterSite Quick Start Manual

28

Emergency Mgmt. Card Connection

When you expand the Emergency Mgmt. Card Connection group in the Tree pane, the
following list of items displays:
Use the Emergency Mgmt. Card Connection group to configure the EMC settings, such as
temperature sensors and the pager call list. In this chapter, you will configure only the
Temperature Sensors and Voltage Sensors. In Chapter 3, "Installing, Configuring, and
Removing InterSite Server Monitor (ISM)," Intergraph Computer Systems did not
recommend configuring the Console Call List item. Also in Chapter 3, you configured the
Pager Call List, Users, and Modem items.
NOTE The items under the EMC Events item are not configurable. See the Intel LANDesk Server
Manager v3.0 Administrator's Guide for information about the use of these items.

DMI

When you select the DMI group in the Tree pane, the Desktop Management Interface (DMI)
displays and shows instrumentation data for desktop servers. DMI is an open standard from
the Desktop Management Task Force. DMI provides a platform-independent and protocol-
independent interface to component instrumentation for desktop servers.
NOTE The DMI Service Provider (the WIN32SL service) is delivered with InterSite DMI and ISM.
InterSite DMI is installed on the server by Intergraph Computer Systems before shipment.
When you install ISM, you are prompted about overwriting Service Provider files. The
prompt shows the dates of the Service Provider files currently on the server. If the Service
Provider files already on the server are newer than the Service Providers that are installed by
ISM, make sure you do not overwrite the files on the server.
CAUTION If you remove ISM, you also remove the WIN32SL service used by InterSite DMI without any
prompts. To ensure that you have a functioning DMI Service Provider, reinstall InterSite DMI.
See the Intel LANDesk Server Manager v3.0 Administrator's Guide for more information.