Table of Contents
Advertisement
Chapter 4 ControlPanel Setup
10 START
Activates scanning or copying.
11 [C] (CLEAR QTY.)
Allows resetting of print quantity.
12 [P] (COUNTER)
Displays the Counter Screen or accesses programming modes for setting special
functions.
13 HELP
Displays a screen with help for the currently selected function.
14 AUTO RESET
Restores copier to automatic mode settings or to key operator settings.
15 JOB MEMORY
Displays screens for selecting job store/job recall functions.
Touch Screen
The Touch Screen is an LCD (liquid crystal display) that displays interactive screens
with touch sensitive keys for making copy/print job selections. Selections are highlighted
at the touch. The screens also work with the conventional control panel keys.
The Touch Screen of the Control Panel is covered with glass. Do not drop
heavy items on the glass, or put excess weight or pressure on it; otherwise
the glass may break or become scratched.
After the power switch is turned on, the Campany name displays for approximately 10
seconds, until initial machine settings are established. Then, the Warm-Up Screen
displays for approximately 6 minutes, until the fixing temperature is reached.
When the Basic Screen is displayed, the Touch Screen becomes interactive. The inter-
active condition enables you to communicate directly with the copier system simply by
touching keys displayed on the screen; or by pressing conventional keys, as required.
4-4 PS-1 (Printing System (1) PostScript option)
Advertisement
Table of Contents
Troubleshooting
