Set Default - Kyocera Vi7360 Instruction Handbook Manual

Chapter 4 ControlPanel Setup

Set Default

It is not necessary to turn OFF/ON the Vi7360.
Select [Set Default] on the Printer Mode Basic Screen to display the Set Default Screen.
Items of the Set Default Screen are as follows:
[Default Paper]
Touch [Default Paper] to set the default Paper Size. Items of the Default Paper Set
Screen are as follows:
8.5x11 (Default) / 8.5x11R / 8.5x14R / 11x17R / A3R / B4R / A4R / A4 / B5 / B5R
[Resolution]
Touch [Resolution] to set the default Resolution. Items of the Default Resolution Set
Screen are as follows:
• Engine Default : set the Resolution to Engine Default
• 400x400 : set the Resolution to 400 dpi (Default)
• 600x600 : set the Resolution to 600 dpi
[Print Quality]
Touch [Print Quality] to set the default Print Quality. Only [1 bit] is available.
[Duplex]
Touch [Duplex] to set the default Duplex. Items of the Default Duplex Set Screen
are as follows:
• Off : set the Duplex off (Default)
• Long Edge : set the Long Edge Duplex
• Short Edge : set the Short Edge Duplex
[Orientation]
Touch [Orientation] to set the default Orientation. Items of the Default Orientation
Set Screen are as follows:
• Portrait : set the Orientation to Portrait (Default)
• Landscape : set the Orientation to Landscape
4-18 PS-1 (Printing System (1) PostScript option)