Reading In Scanned Data On Computer; To Import Scanned Data; Reading In Scanned Data On A Computer - Kyocera Vi7360 Instruction Handbook Manual

Reading in Scanned Data on a Computer

TWAIN-equipped applications are used to read in scanned data. Select a TWAIN driver
from your application (the Kyocera Mita Network Scanner Driver is selected in this proce-
dure), select a scanner (copier having scanned original) using the TWAIN driver, then enter
the box number corresponding to the scanned data so that the scanned data can be read in
from the print controller's hard disk.
There are several TWAIN-capable applications on the market. In this manual, Adobe
PhotoShop LE is used to illustrate how to read in scanned data.

To Import Scanned Data

1. Run the Application that conforms to TWAIN (Adobe PhotoShop LE).
2. Select File - Acquire, and select [Select TWAIN_32_Source...].
3. Select [Kyocera Mita Network Scanner Driver] in the Select Source dialog box.
The displayed Screen varies according to the application in use.
4. Click [Select] button.
5. Select File - Acquire [TWAIN_32_Source...].
6. In the Scanner Box No. Set-up dialog box, enter the server name (IP address) of
the scanner you want to connect to, the scanner name for the driver to identify
the scanner, and the box number you entered when scanning the document.
Then click [OK].
Once the Scanner setting has been set, this dialog box is not displayed the next time you
perform a scanning task. To display this dialog and select another scanner, click the [Scanner
Selection] button on the Kyocera Mita Network Scanner Driver's Main Screen. Then click the
[Add] button on the Scanner Box No. Set-up dialog box.
Chapter 5 Scanner Operation
PS-1 (Printing System (1) PostScript option) 5-11