Paper Jam In The Finisher And The Hole Punch Unit (Both Optional) - Kyocera TASKalfa 650c Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE
Remove the jammed paper.
3
Close the duplexing unit cover.
4
Do not put your hand or fingers on the duplexing unit cover
when closing it.
They could be caught and this could injure you.
Close the bypass tray.
5

Paper jam in the Finisher and the Hole Punch Unit (both optional)

1 Separate the Finisher from the equipment.
1) Open the front cover of the Finisher when the Hole Punch Unit is not installed. Open the Hole Punch Unit cover
when the Hole Punch Unit is installed.
2) Pull the knob to unlock the Finisher.
When the Hole Punch Unit is not installed
22 Clearing a Paper Jam
2
1
When the Hole Punch Unit is installed
1
2