Setting Multiple Accounting Devices; Selecting Accounting Settings In Multi-Set; Selecting Accounting Source Settings - Kyocera TASKalfa 3050ci User Manual

Setting Multiple Accounting Devices

To start the accounting Multi-Set, follow these steps:
1. In the device list, select the devices that will receive settings
2. In the menu bar at the top of the window, click Device >
The Multi-Set wizard opens.
3. In the Device Group page, the application has filtered the
4. Select one group to apply settings to, and click Next.

Selecting Accounting Settings in Multi-Set

The following options may vary on the Settings page, depending
upon the destination device:
Device Accounting Settings
These are settings for job accounting, media type, error handling,
permitting job processing without an account ID, and copy
counter.
Account List
This is a list of device accounts with information about print,
copy, scan and FAX counts.
On the Settings page, select the category of settings to copy to the
destination devices. Only one category of settings can be selected
for each Multi-Set process. Click Next.

Selecting Accounting Source Settings

You can select different ways to create settings for your destination
device.
Warning: When Account List is selected in Settings, if the check
box labeled Overwrite settings on target device at the bottom of
the Method page is selected, the source device settings will be
KMnet Viewer 5.2
by pressing the Ctrl key, and clicking on the devices. You
can also select groups of devices by pressing the Shift key
and clicking the first and last of adjacent devices in the list.
Advanced > Set Multiple Accounting Devices.
Alternatively, you can right-click on a selected device, and
select Set Multiple Accounting Devices from the context
menu.
selected devices by those Multi-Set supports. The devices
are organized by product group.
56