Manage Devices; Adding Devices; Deleting Devices - Kyocera TASKalfa 3051ci Operation Manual

Adding Devices

1
2
3
4
5
6
7
8

Deleting Devices

File Management Utility

2 Manage Devices

Specific MFPs on a network can be selected for use with the application. Use
the Add Device Wizard to select devices by IP address or host name.
You can add devices for the application with the Add Device Wizard.
In the Main screen, click Add Device.
In the Add Device Wizard, enter the IP address or the Host name of the MFP
you wish to add, and then click Add.
Enter another IP address or Host name if necessary. The devices you enter
appear in the list on the right.
Click Next.
In the Communication Settings page, specify the SNMP type (SNMPv1/v2 or
SNMPv3).
If you specify SNMPv1/v2, enter the Read community and Write
community for the MFP. The read community name for the device will be
used in requesting information, while the write community name is sent with
all SNMP receive and send requests, and must match the community values
on the device.
If you specify SNMPv3, enter the login User name and Password for the
MFP.
If the device is enabled with authentication, for Change authentication mode,
select Use local authentication or Use settings on the device as required.
Continue entering the remaining communication setting information as
appropriate.
Click Search. The application adds the printing systems you have specified to
the Main screen.
Removes the selected device or devices from the Devices list in Main screen.
To delete the devices from the list, highlight the device or select the checkbox in
column header to select all devices. Click Delete. A message appears
confirming that selected devices will be deleted. Click Yes.
2-1