Authentication Settings; Setting User Authentication - Kyocera TASKalfa 3050ci User Manual

Upgrade Firmware
This wizard guides you in installing the most current firmware on
devices.
Device Default Settings
This sets the default settings of the selected device, such as
duplex, print quality, paper input and output; plus copy, scan, and
FAX settings. Only one device may be selected at a time.
Settings vary by model.
Device System Settings
This sets the default settings of the selected device, such as
operation panel language, timer settings, and panel lock. Only
one device may be selected at a time. Settings vary by model.
Device Network Settings
This sets the network settings of the selected device, such as IP
address, e-mail settings, SNMP settings, FTP and SMB client
settings, and protocol settings. Only one device may be selected
at a time. Settings vary by model.

Authentication Settings

This sets the authentication settings of the selected device, such as
user login and LDAP settings, and permitting jobs with unknown IDs.
Only one device may be selected at a time. Settings vary by model.
Network Groups
This manages certain user access properties for an entire group of
devices.
TCP Send Data
This sends data directly to the interface of one or more selected
devices.
Authentication Settings
Authentication Settings provide a convenient way for
administrators to manage user authentication and network user
properties. Only one Authentication Settings dialog can be opened
per device. A maximum of three dialogs can be open (for three
different devices) at the same time.

Setting User Authentication

With Authentication Settings, an administrator can configure some
MFP devices to require a user login before it is accessed. If you
select Use local authentication, the device uses the Device User
KMnet Viewer 5.2 38