Custom Options For Adding Devices; Automatic Device Discovery; Scheduling Automatic Device Discovery - Kyocera TASKalfa 3050ci User Manual

Custom Options for Adding Devices

Custom options are available when Custom is selected in the
Add Device wizard. You can select the discovery process to run
on your local network, a specific IP address, or a range of IP
addresses. Continue through the wizard to select the following
options:
On your local network
Select discovery type, TCP/IP port, SNMP options, SSL
options, and discovery start time.
By IP address
Type specific IPv4 or IPv6 addresses or host names and click
Add to add them to the Selected targets list. You can also
click Import to search for a valid IP address list (.CSV or
.TXT). An entry can be removed from the Selected targets
list by selecting it and clicking Remove. Click Next to
continue through the wizard and select TCP/IP port, SNMP
options, SSL options, and discovery start time.
By IP address range
Type valid starting and ending IPv4 addresses and click Add
to add them to the Selected network segments list. An entry
can be removed from the Selected network segments list by
selecting it and clicking Remove. Click Next to continue
through the wizard and select TCP/IP port, SNMP options,
SSL options, and discovery start time.

Automatic Device Discovery

You can set up a regular schedule for performing the discovery
process. If devices are frequently added to or removed from the
network, performing discovery on a regular basis will keep the
device database up to date.

Scheduling Automatic Device Discovery

You can set a schedule for device discovery.
KMnet Viewer 5.2
1. Click Device > Discovery > Automatic
Discovery. The Scheduled Discovery dialog
box opens.
2. If there is an existing discovery mode you would
like to edit, select it and click Properties, make
your selections in each window to set up a
recurring schedule and click Apply changes.
3. Click Add to create a new discovery mode. In the
Add Device wizard, make your selections in
each window to set up a recurring schedule. On
the Confirm Discovery page, click Finish to
3