Account Polling Settings; Device Polling Settings - Kyocera TASKalfa 3050ci User Manual

For an account device, select whether to use Apply same user
information as Device Management (available when user
information is stored in Communication Settings) or Use another
user's information. If Use another user's information is
selected, enter the Login user name and Password for the
device.
For some models, select whether to use local or device
authentication.

Account Polling Settings

Printing devices are interrogated at specific intervals to check for
account counter information. When a device is selected from an
Accounting Devices View, the following polling mode is provided.
Account counter polling
Information is gathered about the counters for each account,
including total number of prints, copies, FAX, scans, page sizes,
duplex pages, and pages per sheet. Select an interval, a day or
date, and time of day.

Device Polling Settings

Printing devices are interrogated at specific intervals to check for
error conditions, operational status, and low toner levels. When a
device is selected from a Device view, the following polling modes
are provided.
Status polling
Information is gathered about the current operational state of the
device, such as error conditions, panel messages, and operating
mode. The available range is between 5 and 300 seconds.
Counter polling
Information is gathered about the values held by various
counters in the device, such as number of color pages printed,
number of black and white pages, number of faxes received, and
so on. The available range is between 1 and 10000 minutes.
Toner level polling
Information is gathered about the current level of toner in the
device. The available range is between 1 and 10000 minutes.
KMnet Viewer 5.2 63