Replacing Ink Cartridges; Choosing Ink Cartridges; Checking The Ink Level; Precautions On Ink Cartridge Replacement - Epson Stylus Photo RX700 Series Basic Operation Manual

Epson basic operation guide printer rx700
Hide thumbs Also See for Stylus Photo RX700 Series:
Table of Contents

Advertisement

Replacing Ink Cartridges

Choosing Ink Cartridges

You can use the following cartridges with this
product.
Black ink cartridge
Black
Color ink cartridge
Cyan
Magenta
Yellow
Light cyan
Light magenta
Caution:
c
Epson recommends the use of genuine Epson ink
cartridges. Epson warranties do not cover damage
to your product caused by the use of ink cartridges
not manufactured by Epson.

Checking the Ink Level

Press the Setup button.
1.
2.
Select Ink Levels.
The amount of ink appears.
3.
Press the OK button to return to the previous
display once you have checked the ink level.
T5591
T5592
T5593
T5594
T5595
T5596
Back
OK
Precautions on Ink Cartridge
Replacement
❏ If you need to remove an ink cartridge
temporarily from this product, be sure to protect
the ink supply area of the ink cartridge from dirt
and dust. Store the ink cartridge in the same
environment as this product.
❏ The valve in the ink supply port is designed to
contain any excess ink that may be released.
However, careful handling is recommended. Do
not touch the supply port of the ink cartridge or
its surrounding area.
❏ This product uses ink cartridges equipped with
an IC chip. The IC chip accurately monitors the
amount of ink used by each cartridge, so even if
a cartridge is removed and then later inserted
again, all of its ink can be used.
❏ When an ink cartridge becomes empty, you
cannot continue copying or printing even if the
other cartridges still contain ink. Before copying
or printing, replace the empty cartridge.
❏ In addition to being used in document copying
or printing, ink is also consumed in the following
operations: print head cleaning, self-cleaning
cycle performed when this product is turned on,
and ink charging when an ink cartridge is
installed in this product.
❏ Do not refill the ink cartridges. This product
calculates the amount of ink remaining using an
IC chip built into an ink cartridge. Even if the
cartridge is refilled, the amount of ink remaining
is not recalculated by the IC chip and therefore
the amount of ink available for use does not
change.
❏ After an ink cartridge is replaced, if the ink is low
it may become empty. When a message appears
to indicate the ink is low, prepare a new ink
cartridge.
❏ Do not touch the green IC chip on the top of the
cartridge. This can damage the ink cartridge.
Replacing Ink Cartridges
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents