Selecting The Film Type; Changing Print Settings; Storing The Film Holder - Epson Stylus Photo RX700 Series Basic Operation Manual

Selecting the Film Type

Color negative film
Color slide

Changing Print Settings

1
Menu Item Setting Item
Paper Type Plain (Front),
Plain (Back),
Bright White
(Front), Bright
White (Back),
Photo Paper,
Prem.Glossy,
GlossyPhoto,
SemiGloss,
Matte
A4, 10 × 15
Paper Size
cm (4 × 6 in)
Layout Borderless
with Border
Restoration ON
OFF
34
Printing from Film
Back OK
Positive color film (strip)
B&W negative
1. Select the
Menu Item.
2. Select the
2
Setting Item.
3. Press the
OK button.
Back OK
Description
Prints in the paper type
you select.
See page 4 for detailed
settings.
Prints in the paper size you
select.
Prints without margin.
Prints with margin.
Restores faded colors on
film and in photos.
Note:
This setting has no effect
when B&W negative is
selected as the Film Type.
Leaves faded colors on
film and in photos as they
are.
Print detail settings
2
Print Options Setting Item
Item
Quality Normal, Photo,
Best Photo
Saturation Less Saturation
Normal
More
Saturation

Storing the Film Holder

When not using the film holder, you can store it
inside the document cover.
1. Open the document cover.
2. Slide the film holder into the document cover.
3. Insert the reflective document mat.
4. Close the document cover.
1. Press the
Options button.
2. Select the
Menu Item.
3
3. Select the
setting Item.
4. Press the
OK button.
Back OK
Description
Prints in the quality
setting you select.
Makes printouts duller.
Makes no adjustment.
Makes printouts more
vivid.