Placing A Photo Or Document On The Document Table - Epson Stylus Photo RX700 Series Basic Operation Manual

7. Slide the left edge guide so that it meets the left
edge of the paper.
8. Close the feeder guard.
Note:
❏ The loading capacity differs depending on the
following types of paper.
Paper Type Paper Type
Settings
Plain Paper Plain (Front)
Plain (Back)
EPSON Bright Bright White
White Ink Jet (Front)
Paper
Bright White
(Back)
Epson Photo Photo Paper
Paper
EPSON Photo PQIJ/Matte (PQIJ
Quality Ink Jet when copying
Paper and Matte when
printing)
EPSON Matte Matte
Paper-
Heavyweight
EPSON Prem.Glossy
Premium Glossy
Photo Paper
EPSON SemiGloss
Premium
Semigloss
Photo Paper
EPSON Photo Photo Stickers
Stickers (for copying and
printing from a
memory card)
* The appropriate paper type is automatically selected
when selecting Custom Print and Iron in the Memory
Card mode.
❏ You cannot use Plain Paper when Borderless has been
selected in the Copy Layout.
Placing a Photo or Document on
the Document Table
1. Open the document cover. Place the original
document facing down on the document table.
Make sure that the document is properly
aligned.
Loading
Capacity
Up to 150
sheets
c
Up to 120
sheets
Up to 100
Note:
sheets
When copying photos or copying on CD/DVD, place
the document 5 mm away from the edge of the
Up to 80
sheets
document table.
Up to 20
sheets
Up to 100
sheets
5 mm (max)
Up to 20
sheets
2. Make sure the reflective document mat is
attached to the document cover.
3. Close the document cover gently so that the
document does not move.
Note:
To copy the document properly, close the document
cover to prevent interference from the external light.
One sheet
at a time
Paper Type Paper Type
Settings
Iron-on Cool None*
Peel Transfer (for printing from
Paper a memory card)
Caution:
Never open the document cover beyond its
limit by intention.
5 mm (max)
Basic Copying
Loading
Capacity
One sheet
at a time
7