Epson Stylus Photo RX700 Series Basic Operation Manual page 30

Print Options Setting Item
Item
Saturation Lowest
Lower
Default
Higher
Highest
Small Image On
Off*
Print Info. Off*
On
Fit to Frame On
Off*
Bidirectional On*
Off
* Indicates the default setting.
30
Printing Directly from a Memory Card – Printing Options
Description
Makes printouts very dull.
Makes printouts slightly duller.
Makes no adjustment.
Makes printouts slightly more vivid.
Makes printouts very vivid.
Interpolates image resolution (and removes)
noise. (Printing speed is slow.)
Interpolates image resolution (but does not
remove) noise.
Prints with no information.
Also prints information about the photo taken.
Automatically trims the areas of an image that extend beyond the margins of the selected
print size. Either the top and bottom, or the left and right areas of photo is trimmed,
depending on the aspect ratio of the original photo and the selected print size.
Does not trim the image.
Faster (Printing quality is normal.)
By turning this function on, you can perform bidirectional printing (printing from right to left
and from left to right).
Slower (Printing quality is fine.)
This feature is not available when None is
selected as the Auto Correct setting.