Loading Paper In The Cassettes - Kyocera TASKalfa 255 Operation Manual

Common Operations > Loading Paper

Loading Paper in the Cassettes

The standard cassette will each hold plain paper, recycled paper or color paper. The standard cassette holds up to 500
sheets of plain paper (80 g/m²).
The following paper sizes are supported: Ledger, Letter-R, Letter, Legal, Statement-R, Oficio II, A3, B4, A4, A4-R, A5-R,
B5, B5-R, Folio, 216 × 340 mm, 8K, 16K-R, and 16K.
NOTE
You should not use inkjet printer paper or any paper with a special surface coating. (Such paper may cause paper
jams or other faults.)
When using media types other than plain paper (such as recycled or colored paper), always specify the media type
setting. (Refer to Media Type on page 9-8) The cassettes can hold paper with weights up to 163 g/m². If you are using
a paper weight between 106 and 163 g/m², set the media type to Thick.
Do not load thick paper that is heavier than 163 g/m² in the cassettes. Use the multi purpose tray for paper that is
heavier than 163 g/m².
If the machine will not be used for a prolonged period, protect all paper from humidity by removing it from the
cassettes and sealing it in the paper storage bag.
1
Adjust the cassette size.
1
2
Adjust the cassette size to reflect the size of paper being loaded. Paper sizes are marked on
the cassette.
NOTE
When using 11 × 17" (ledger) paper, lay the paper length guide down flat.
3-3