Supported Paper Sizes - Kyocera TASKalfa 255 Operation Manual

Appendix > Paper

Supported Paper Sizes

Paper of the following sizes is supported by the machine.
Measurements in the table take into account a ±0.7 mm dimensional accuracy for length and width. Corner angles must
be 90°±0.2°.
Multi Purpose Tray
A6-R (105 × 148 mm)
B6-R (128 × 182 mm)
Hagaki (100×148mm)
Oufuku Hagaki (148 × 200 mm)
Executive (7 1/4 ×10 1/2")
Envelope DL (110 × 220 mm)
Envelope C5 (162 × 229mm)
Envelope C4 (229 × 324mm)
ISO B5 (176 × 250 mm)
Envelope #10 (Commercial #10) (4 1/8 × 9 1/2")
Envelope #9 (Commercial #9) (3 7/8 × 8 7/8")
Envelope #6 (Commercial #6 3/4) (3 5/8 × 6 1/2")
Envelope Monarch (3 7/8 ×7 1/2")
Youkei 2 (114 × 162 mm)
Youkei 4 (105 × 235 mm)
Size Entry (98 × 148 to 297 × 432 mm)
Smoothness
The paper surface should be smooth, but it must be uncoated. With paper that is too smooth and slippery, several
sheets may accidentally be supplied at once, causing jams.
Basis Weight
In countries that use the metric system, basis weight is the weight in grams of one sheet of paper one square meter in
area. In the United States, basis weight is the weight in pounds of one ream (500 sheets) of paper cut to the standard
size (or trade size) for a specific grade of paper. Paper that is too heavy or too light may be supplied incorrectly or cause
paper jams, which may cause excessive wear of the machine. Mixed paper weight (i.e., thickness) may cause several
sheets to be supplied at once accidentally and may also cause blurring or other printing problems if the toner fails to
adhere correctly.
Thickness
Avoid using paper that is too thick or thin. Signs that paper may be thin include frequent problems with paper jams or
with several sheets being supplied at once. Paper jams may also indicate that the paper is too thick. The proper
thickness is between 0.086 and 0.230 mm.
Cassette or Multi Purpose Tray
A3 (297 × 420 mm)
B4 (257 × 364 mm)
A4 (297 × 210 mm)
A4-R (210 × 297 mm)
B5 (257 × 182 mm)
B5-R (182 × 257 mm)
A5-R (148 × 210 mm)
Folio (210 × 330 mm)
Ledger
Legal
Letter
Letter-R
Statement-R
Oficio II
216 × 340 mm
8K (273 × 394 mm)
16K (273 × 197 mm)
16K-R (197 × 273 mm)
11-12