Fax Transmission Functions - Kyocera TASKalfa 205c Operation Manual

Sending Faxes > Fax transmission functions

Fax transmission functions

Functions frequently used for transmission are shown at the bottom of the transmission screen. To show other functions,
press [Functions]. Use [] or [] to select the function.
Specify the original size.
Specify the correct original orientation.
Send mixed size originals.
Automatically scan 2-sided originals.
Select the size of the image being sent.
Set the resolution at which to scan originals.
Adjust the density.
Select original image type for best results.
Change the size of the image being sent.
Scan a large number of originals separately and then produce as one job.
Add a file name to the job to easily check its status.
Send notice by e-mail when a job is complete.
Specify a time for transmission.
Connect to the destination first and then scan the original.
Set up another transmission while communication is taking place.
Interrupt transmission and send another original.
Send an original using a sub address.
Initiate reception of a fax by controlling the receiving machine.
Encrypt an original to send it safely.
What do you want to do?
4-7
Reference Page

Original Size Selection page 4-8
Original Orientation  page 4-9
Mixed Sized Originals  page 4-9
2-sided/Book Original  page 4-10

Sending Size Selection page 4-11
Selecting the FAX Resolution
4-11
Selecting the Density  page 4-12
Selection of Original Image
4-12
Zoom  page 4-13
Continuous Scan  page 4-13

File Name page 4-22
Job Finish Notice  page 4-21
Delayed Transmission  page 4-16
Direct Transmission  page 4-14

Standby Transmission page 4-19
Interrupt Send  page 4-20
Sub Address Transmission
6-23
Polling Communication  page 6-26
Encryption  page 6-36
 page
 page
 page