Kyocera TASKalfa 205c Operation Manual page 43

Methods For Entering the Destination > Entering the destination fax number with the numeric keys
4
Key
Sub Address
Detail Settings TX Start Speed
ECM
Encrypted
Transmission
NOTE
Press [On Hook] to connect to the telephone line.
When the FAX number has been entered, the machine starts dialing to the receiving
system.
After pressing this key, you can dial the number of the receiving system using the numeric
keys. For details, refer to
Press [OK].
Ready to send.
FAX
On Hook Sub Address
1234567890
Pause Space
Menu Next Dest. Cancel
Entry of the destination finishes.
NOTE
When On is selected in Entry Check for New Dest., a confirmation screen is displayed for
the entered FAX number. Re-enter the same FAX number and press [OK]. For details, refer
to Entry Check for New Dest. in the Operation Guide for the machine.
Press [Next Dest.] to enter the next fax number. For details, refer to
.
on page 3-8
In addition to a fax, you can include e-mail transmission and folder (SMB/FTP) transmission
to send as one job. For details, refer to the machine's Operation Guide.
To communicate using the sub address, press this key. For
details, refer to Sub Address Transmission on page 6-23.
To change the transmission start speed, press this key. Select
the speed from 33,600 bps, 14,400 bps, and 9,600 bps.
ECM (error correction mode) is a function to automatically
resend an image that has not been correctly sent or received
due to the effects of noise on the telephone line during
transmission.
To send faxes using encryption, press this key. For details,
refer to Encryption on page 6-36.
Manual Send on page 4-15
10:10
Detail Settings
Backspace
OK
3-3
Description
.
Broadcast Transmission