Vivotek IP7251 User Manual page 9

Set up the Network Camera through Power over Ethernet (PoE)
When using a PoE-enabled switch
The Network Camera is PoE-compliant, which allows it to be powered via a single Ethernet
cable� If your switch/router supports PoE, refer to the following illustration to connect the
Network Camera to a PoE-enabled switch/router via an Ethernet cable�
When using a non-PoE switch
If your switch/router does not support PoE, use a PoE power injector (optional) to connect
between the Network Camera and a non-PoE switch/router�
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
PoE power injector
power + data transmission
PoE switch
(optional)
non-PoE switch
User's Manual - 9