PR2 mode
State of panel
lights
O Power
F Ready
O Power
O Offline
O Power
F Offline
O Pause
F Ready
F F1/Eject
F Offline
F F2
O = on, F = flashing
••• = short series of beeps (three beeps), ••••• = long series of beeps (five beeps)
Beep
Problem
pattern
Solution
—
There is no paper loaded in the slot.
Load a paper into the front slot.
—
Paper is not loaded correctly.
Remove the paper and reload it correctly. See
"Loading Passbooks" on page 28, or "Loading
Single Sheets" on page 29.
—
Paper is not fully ejected.
See "Clearing Paper Jams" on page 119 for
instruction on ejecting paper.
—
Paper is jammed in the printer.
To clear the paper jam, see"Clearing Paper
Jams" on page 119.
—
The printer cover is open.
Stop the operation and close the printer cover.
—
The print head is overheated.
Wait for a few minutes; the printer resumes
printing automatically once the print head
cools.
•••••
An unknown printer error has occurred.
Turn off the printer and leave it off for several
minutes; then turn on the printer again. If the
error recurs, contact your dealer.
Chapter 6 Problem Solver
100