ESC/P and IBM PPDS modes
State of panel
lights
O Power
F Ready
O Offline
O Power
O Offline
O Power
F Offline
O Pause
F Ready
F F1/Eject
F Offline
F F2
O = on, F = flashing
••• = short series of beeps (three beeps), ••••• = long series of beeps (five beeps)
Beep
Problem
pattern
Solution
•••
There is no paper loaded in the slot.
Load a paper into the front slot.
•••
Paper is not loaded correctly.
Remove the paper and reload it correctly. See
"Loading Passbooks" on page 28, or "Loading
Single Sheets" on page 29.
•••
Paper is not fully ejected.
Press the F1/Eject button to eject paper.
•••
Paper is jammed in the printer.
To clear the paper jam, see"Clearing Paper
Jams" on page 119.
•••
The printer cover is open.
Stop the operation and close the printer cover.
—
The print head is overheated.
Wait for a few minutes; the printer resumes
printing automatically once the print head
cools.
•••••
An unknown printer error has occurred.
Turn off the printer and leave it off for several
minutes; then turn on the printer again. If the
error recurs, contact your dealer.
Chapter 6 Problem Solver
101