Compress Printing Mode; About Your Printer's Default Settings - Epson PLQ-20 Reference Manual

Compress Printing Mode

You can compress your printing data to the ratio of 75% by
following the steps below.
Note:
Compress printing mode is effective only when the printer is in the
ESC/P mode.
1. Turn off the printer.
c
2. Turn on the printer while holding the F1/Eject and Offline
buttons. The printer makes two short beeps and enters the

compress printing mode.

About Your Printer's Default Settings

The default settings control many printer functions. While you
can often set these functions through your software or printer
driver, you may sometimes need to change a default setting from
the printer's control panel using the default-setting mode.
For a detailed description of the settings you can change in the
default-setting mode, see "Understanding default settings" on
page 80. For instructions on changing the settings, see "Changing
default settings" on page 94.
Caution:
Whenever you turn off the printer, wait at least five seconds
before turning it back on; otherwise you may damage the
printer.
Chapter 5 Control Panel 79