Epson Photo 700 User Manual page 62

Custom Printing
Note:
If you choose Black for
your Ink setting and
select a Color such as
Red for your watermark,
the watermark is printed
in gray.
If your monitor displays
only 16 colors, the
Intensity adjustments are
not shown in the Layout
graphic. If you choose the
No Halftoning setting, the
Intensity setting does not
determine how your
watermark is printed.
The name of your PICT file appears in the
is added to the Watermark List. Click the
close the dialog box.
The custom watermark now appears as the selected
watermark in the Layout dialog box and is shown in the
Layout graphic.
3. Now select the way you want the watermark to appear by
choosing the following options. The Layout graphic
changes to reflect all the settings you choose.
lets you choose a color for your predefined
Color
watermark:
or . You cannot select a color for custom
Yellow
watermarks; they are the same color as the original
PICT file.
sets the lightness or darkness of the
Intensity
watermark (from 5% to 100%) based on where you
move the slidebar.
To adjust the size and position of the watermark, move
the cursor over the Layout graphic. Four boxes appear
in the corners of the graphic and the cursor changes to
a hand.
To move the watermark, click anywhere inside the
graphic and drag it into one of five positions: center,
upper-right, upper-left, lower-right, or lower-left.
2-32
, , ,
Red Black Blue Aqua
field and
Name
button to
Save
, , ,
Lime Fuchsia
Click and drag
anywhere in here to
move the watermark
Click and drag one of
the corner boxes to
resize the watermark